Preparation
Make sure all bricks joints are perfectly sealed. Where necessary,
use RIALTO WALLCEM, a non-cracking elastic mortar. Remove immediately
any excess of material on the bricks.
Finishing
Either using a brush or a low pressure spray-gun (0.5 bar), apply
to fully saturate the surface a coat of the water-repellent, anti-saline
efflorescence RIALTO DURASIL single-can hardening primer, a colorless
ready-to-use, water-based solution, based on an alkysilane emulsion.
RIALTO DURASIL average covering capacity is 0,3 l/m².
Price for material and application, excluding any scaffolds, €
…….. per m²
|
