Preparation
Strip any oxidized iron rods appearing on the surface of the reinforced
concrete until all rust has been removed. Use a sander to remove
the rust and apply immediately on the iron rods RIALTO UNIVERSAL,
an anti-rust protective product. Average covering capacity: 100
ml/m². Replace the iron rods whose section has been reduced
by more than 30% and weld new ones. Patch with the cement-based
mortar RIALTO WALLCEM, mixed with 10% of RIALTO MATONAL (max thickness:
0.5 cm). RIALTO WALLCEM average covering capacity: 1.2 kg/m²
per 1-mm thickness. Allow the surface to dry completely before
proceeding. Apply a coat of RIALTO STABILIZER, a hardening and
insulating primer based on acrylic and petrol resins in a solvent.
Average covering capacity: 160 ml/m². When the surface is
completely dry, apply a coat diluted to 25% with water of RIALTO
FINISH, in the same color as the finishing product.
Average covering capacity: 100 cl/m².
Finishing
Apply on a dry substrate using a stainless steel trowel, and a
plastic trowel to finish off, one coat of RIALTO ERALIT, a protective
and decorative coating with fine troweled plaster and antique-like
speckled effect, based on selected inert minerals (silica, marble
and quartz), a thermoplastic copolymer binder and UV ray-resistant
pigments. Surface adherence not lower than 7 kgf/cm². Water
vapor permeability not lower than 24 g/m² - 24 hours (ASTM
E96 Regulations), µ=830, Sd=1.0 m.
Average covering capacity on fine plaster: 1.5 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m²
|
