Preparation
Apply an undercoat of RIALTO FINISH of the same color as the finish.
Dilute RIALTO FINISH to 25-30% with water and apply using either
a brush, roller or spray. Average covering capacity on fine plaster:
150 g/m². After the application of RIALTO FINISH, allow at
least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate using a stainless steel trowel, and a
plastic trowel to finish off, one coat of RIALTO ERALIT, a protective
and decorative coating with fine troweled plaster and antique-like
speckled effect, based on selected inert minerals (silica, marble
and quartz), a thermoplastic copolymer binder and UV ray-resistant
pigments. Surface adherence not lower than 7 kgf/cm². Water
vapor permeability not lower than 24 g/m² - 24 hours (ASTM
E96 Regulations), µ=830, Sd=1.0 m.
Average covering capacity on fine plaster: 1.5 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m²
|
