Preparation
Apply an undercoat of RIALTO FINISH of the same color as the finish.
Dilute RIALTO FINISH to 25-30% with water and apply using either
a brush, roller or spray. Average covering capacity on fine plaster:
150 g/m². After the application of RIALTO FINISH, allow at
least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate, using a stainless steel trowel and a
plastic trowel to finish off, RIALTO CARSO, a protective and decorative
plain-color coating with fine rustic granulated effect, based
on selected inert minerals (silica, marble and quartz), a thermoplastic
copolymer binder and UV ray-resistant pigments. Surface adherence
not lower than 10 kgf/cm². Water vapor permeability not lower
than 38 g/m² - 24 hours (ASTM E96 Regulations), µ=500,
Sd=0.6 m.
Average covering capacity: 2 kg/m² for type "1"
and 3.3 kg/m² for type "2".
Price for material and application, excluding any scaffolds, €
…….. per m²
|
