Preparation
Apply one coat of RIALTO STABILIZER, an insulating hardening primer
based on acrylic and petrol resins in aromatic and aliphatic solvents,
either using a brush or a roller. Average covering capacity: 1.7
dl/m². Allow at least 24 hours before applying the finishing
product.
Finishing
Apply two coats, either using a brush or a roller and allowing
at least 8-10 hours between first and second coat, of the RIALTO
FINISH protective coating with smooth, mat and suede-like decorative
effect, a product based on inert minerals, such as mica and quartz,
a thermoplastic terpolymer binder, a fungicide-bactericide agent
and UV-ray resistant pigments. Adhesion power not lower than 8
kgf/cm², water-repellency, water vapor permeability: 30 g/m²
- 24 hours (ASTM E96 Regulations), µ=2860, Sd=0.71 m.
Average covering capacity on fine plaster: 400 g/m².
Price for material and application, excluding any scaffolds, €
…….. per m²
|
