Preparation
Remove any loose part of old paint, and patch and seal any damaged
section. Apply one coat of RIALTO DURASIL, a water-based single-can,
anti-saline efflorescence water-repellent and hardening primer.
Average covering capacity: 0,3 l/m². Apply one coat of RIALTO
FINISH diluted to 25% with water; average covering capacity: 110
ml/m². Smooth and level with RIALTO WALLCEM BIANCO. Average
covering capacity: 2 kg/m².
Finishing
Apply using a stainless steel trowel, RIALTO ANTIQUA type "1",
a colored mineral plaster based on seasoned slaked lime, mineral
aggregates and alcali- and UV ray-resistant pigments. Finish off
with a wet sponge trowel and then smooth, using a stainless steel
trowel. Water vapor permeability: 380 g/m² - 24 hours (DIN
53122 Regulations), µ=45, Sd=0.04 m. Surface adherence not
lower than 10 kgf/cm².
Average covering capacity on fine plaster: 1.8 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m²
|
