Preparation
No specific preparation is required
Finishing
Apply using a stainless steel trowel, one coat of RIALTO ANTIQUA
type "1", a colored mineral plaster based on seasoned
slaked lime, mineral aggregates with different granulometry and
alcali- and UV ray-resistant pigments. Finish off with a wet sponge
trowel. Water vapor permeability: 380 g/m² - 24 hours (DIN
53122 Regulations), µ=45, Sd=0.04 m. Surface adherence not
lower than 10 kgf/cm². On a perfectly dry surface, apply
a second coat of RIALTO ANTIQUA type "1" of a different
color, usually lighter. Using templates prepared earlier, scratch
and carve the second coat of RIALTO ANTIQUA type "1",
until the color of the first coat is visible.
Average covering capacity on fine plaster for RIALTO ANTIQUA "1":
2,5 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m²
|
