Preparation
Remove any loose part of old paint and level off the surface as
necessary. Apply a coat of RIALTO PRIMER based on acrylic resins
(dilute 1 part of PRIMER and 7-8 parts of water). Average covering
capacity: 25 ml/m². After at least 6 hours, apply a coat
of RIALTO FINISH (white color), diluted to 20% with water. Average
covering capacity: 110 ml/ m². Apply using a stainless steel
trowel one or two thin coats of RIALTO SOTTOFONDO VENEZIANO, in
white or a color similar to the finish color, but in a lighter
shade.
Average covering capacity: 700 g/m². After 24 hours, sand
with 220-grit sandpaper and remove dust.
Finishing
Apply, using a stainless steel trowel and the technique for STUCCO
with spatula effect, RIALTO VENEZIANO, a colored self-polishing
stucco based on a terpolymer vinyl-acetate-acrylic resin, special
pulverized inert minerals and a fungicide-bactericide permanent-action
agent. Polish using a stainless steel trowel and dry-sand with
abrasive 1200-grit sandpaper. Average covering capacity: 200 g/m².
In rooms usually subject to dirt and tear and wear, after the
stucco with spatula effect has been applied and polished, apply
RIALTO CERA D'ARTE and polish again using a soft rag.
Price for material and application, excluding any scaffolds, €
…….. per m²
|
