Preparation
Apply one coat of RIALTO PRIMER based on acrylic resins (dilute
1 part of PRIMER and 7-8 parts of water). Average covering capacity:
25 ml/m². After at least 6 hours, apply one coat of RIALTO
FINISH diluted to 20% with water, of the same color as the finish
to be applied. Average covering capacity: 110 g/m².
Finishing
Apply on a dry substrate using a stainless steel trowel and a
plastic trowel one coat of RIALTO DURALBO, a protective coating
with fine scored decorative effect, based on selected inert minerals
(granite, silica and marble), a thermoplastic copolymer binder
and UV ray-resistant pigments. Adhesion not lower than 6 kgf/cm².
Water vapor permeability: 23 g/m² - 24 hours (ASTM E96 Regulations,
µ=830, Sd=1.0).
Average covering capacity: 1.7 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
