Preparation
Apply a coat of RIALTO PRIMER based on acrylic resins (dilute
1 part of PRIMER and 7-8 parts of water). Average covering capacity:
25 ml/m². After at least 6 hours, apply a coat of RIALTO
FINISH (white color), diluted to 20% with water. Average covering
capacity: 110 ml/m². Apply using a stainless steel trowel
one or two thin coats of RIALTO SOTTOFONDO VENEZIANO, in white
or a color similar to the finish color, but in a lighter shade.
Average covering capacity: 700 g/m². After 24 hours, sand
with 220-grit sandpaper and remove dust.
Finishing
Apply, using a stainless steel trowel and the technique for STUCCO
with spatula effect, RIALTO VENEZIANO, a colored self-polishing
stucco based on a terpolymer vinyl-acetate-acrylic resin, special
pulverized inert minerals and a fungicide-bactericide permanent-action
agent. Polish using a stainless steel trowel and dry-sand with
abrasive 1200-grit sandpaper.
Average covering capacity: 200 g/m². In rooms usually subject
to dirt and tear and wear, after the stucco with spatula effect
has been applied and polished, apply RIALTO CERA D'ARTE and polish
again using a soft rag.
Price for material and application, excluding any scaffolds, €
…….. per m²
|
