Preparation
Remove any loose paint or plaster material. With a steel trowel,
level the surface (layer thickness: approximately 4 mm) using
a mix composed of: 2 parts of RIALTO MATONAL, 3 parts of Portland
Cement, 3 parts of sand and water as needed (parts in volume).
Average covering capacity for 4-mm thickness of RIALTO MATONAL:
1 l/m². where the surface is damaged, incorporate RIALTO
FIBRATEX, an alcali-resistant fiberglass (width: 25 cm).
Finishing
Apply using a stainless steel trowel, and a wet sponge trowel
to finish off, the breathable leveling plaster prepared with 1
part of water and two or three parts of RIALTO HYDROLIME RA, composed
of natural hydraulic lime and impurity-free selected carbonate
sand in the correct granulometric proportion (0-1.2 mm), free
from cement and synthetic additives, excellent mineral surface
adherence.
Average covering capacity: 1.9 kg/m² per mm of thickness.
Price for material and application, excluding any scaffolds, €
…….. per m²
|
