Preparation
Widen the cracks and fill them with RIALTO INTONAL mixed with
30% of Portland Cement. Where the surface is damaged, incorporate
RIALTO FIBRATEX, a fiberglass (width: 25 cm). Average covering
capacity of RIALTO INTONAL: 1.5 kg/m². After 24 hours, apply
a coat of RIALTO FINISH diluted to 20% with water. Average covering
capacity: 110 ml/ m².
Finishing
Apply on a dry substrate using a stainless steel trowel, and a
plastic trowel to finish off, RIALTO CARSO, a protective and decorative
plain-color coating with fine rustic granulated effect, based
on selected inert minerals (silica, marble and quartz), a thermoplastic
copolymer binder and UV ray-resistant pigments. Surface adherence
not lower than 10 kgf/cm². Water vapor permeability not lower
than 38 g/m² - 24 hours (ASTM E96 Regulations, µ=500,
Sd=0.6 m).
Average covering capacity: 2 kg/m² for type "1"
and 3.3 kg/m² for type "2".
Price for material and application, excluding any scaffolds, €
…….. per m²
|
