Preparation
Widen the cracks and fill them with RIALTO INTONAL mixed with
30% of Portland Cement. Where the surface is damaged, incorporate
RIALTO FIBRATEX, a fiberglass (width: 25 cm). Average covering
capacity: 1.5 kg/m². Sand and level using common interior
leveling products. Apply a coat of RIALTO PRIMER based on acrylic
resins (dilute 1 part of PRIMER and 7-8 parts of water). Average
covering capacity: 25 ml/m². After at least 6 hours, apply
a coat of RIALTO FINISH (white color), diluted to 20% with water.
Average covering capacity: 110 ml/ m².
Finishing
Apply using a stainless steel spatula or small trowel three coats
of RIALTO EVOLUTION, a finishing STUCCO composed of mineral compounds
with different granulometry, natural earth and UV ray-resistant
oxides, with glossy or satin cloudy spatula effect.
Average covering capacity: 800 g/m². In order to obtain a
perfectly water-repellent and evenly glossy surface, apply a thin
layer of RIALTO CERA D'ARTE using a small stainless steel trowel.
Polish using the trowel or a soft rag before it is completely
dry.
Price for material and application, excluding any scaffolds, €
…….. per m²
|
