Preparation
On a new sound plaster or on old surfaces leveled with RIALTO
WALLCEM, apply one coat of the absorption-regulating, water-repellent,
anti-saline efflorescence RIALTO ISOCAL primer, based on an oligomeric
organosiloxane. RIALTO ISOCAL average covering capacity is 0,4
l/m².
Finishing
Apply using a stainless steel trowel, RIALTO ANTIQUA type "1",
a colored mineral plaster based on seasoned slaked lime, mineral
aggregates and alcali- and UV ray-resistant pigments. Finish off
with a wet sponge trowel and then smooth, using a stainless steel
trowel. Water vapor permeability: 380 g/m² - 24 hours (DIN
53122 regulations), µ=45, Sd=0.04 m. Surface adherence not
lower than 10 kgf/cm². Average covering capacity on leveled
coarse plaster: 2.5 kg/m². After 3-4 hours apply three coats
of RIALTO EPOCA SPATOLATO, a mineral coating based on seasoned
slaked lime, inert minerals and alcali- and UV ray-resistant pigments.
Water vapor permeability: 430 g/m² - 24 hours (DIN 53122
Regulations), µ=80, Sd=0.05 m. Surface adherence not lower
than 30 kgf/cm². Average covering capacity: 1 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m²
|
