Preparation
Remove old paint or loose plastic material. Level off all surfaces
using RIALTO WALLCEM BIANCO leveling plaster. Average covering
capacity: 2 kg/m². After at least 48 hours, apply by brush
or roller a coat of RIALTO STABILIZER, a hardening and insulating
primer based on acrylic and petrol resins in aromatic and aliphatic
solvents. Average covering capacity: 1.7 dl/m². Allow at
least 24 hours before applying the finishing product.
Finishing
Apply two coats, using a brush or a roller and allowing at least
8-10 hours between first and second coat, of RIALTO FINISH, a
protective coating with smooth mat suede-like decorative effect
and based on selected inert minerals (mica and quartz), a thermoplastic
terpolymer binder, a fungicide-bactericide agent, and UV ray-resistant
pigments. Surface adherence not lower than 8 kgf/cm² and
water-repellent with water vapor permeability equal to 30 g/m²
- 24 hours (ASTM E96 Regulations, µ=2860, Sd=0.71 m). Average
covering capacity on fine plaster: 290 ml/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
