Preparation
Remove old paint or any loose plastic material and fix dusty or
friable sections applying a coat of RIALTO STABILIZER, a hardening
insulating primer based on acrylic and petrol resins in aromatic
and aliphatic solvents. Average covering capacity: 1.7 dl/m².
Apply a coat of RIALTO FINISH primer, in the same color as the
finishing product. Dilute RIALTO FINISH to 25-30% with water and
apply either by brush, roller or spray. Average covering capacity
on fine plaster: 1 dl/m². After the application of RIALTO
FINISH, allow at least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate using a medium-nap roller one coat of
RIALTO ROLLER, a protective and decorative mat coating with orange-peel
relief effect, based on a thermoplastic copolymer binder, selected
inert minerals (granite, mica and silica) with different granulometry,
and alcali-, acid- and UV ray-resistant pigments. Surface adherence
not lower than 10 kgf/cm². Water vapor permeability 45 g/m²
- 24 hours (ASTM E96 Regulations, µ=800, Sd=0.48 m). Average
covering capacity on fine plaster: 800 g/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
