Preparation
Remove old paint or any loose plastic material and fix dusty or
friable sections applying a coat of RIALTO STABILIZER, a hardening
insulating primer based on acrylic and petrol resins in aromatic
and aliphatic solvents. Average covering capacity: 1.7 dl/m².
Apply a coat of RIALTO FINISH primer, in the same color as the
finishing product. Dilute RIALTO FINISH to 25-30% with water and
apply either by brush, roller or spray. Average covering capacity
on fine plaster: 1 dl/m². After the application of RIALTO
FINISH, allow at least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate using a stainless steel trowel and a
plastic trowel one coat of RIALTO DURALBO, a protective coating
with fine scored decorative effect, based on selected inert minerals
(granite, silica and marble), a thermoplastic copolymer binder
and UV ray-resistant pigments. Surface adherence not lower than
6 kgf/cm². Water vapor permeability not lower than 23 g/m²
- 24 hours (ASTM E96 Regulations, µ=830, Sd=1.0 m).
Average covering capacity: 1.7 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
