Preparation
Remove old paint or any loose plastic material and fix dusty or
friable sections applying a coat of RIALTO STABILIZER, a hardening
insulating primer based on acrylic and petrol resins in aromatic
and aliphatic solvents. Average covering capacity: 1.7 dl/m².
Apply a coat of RIALTO FINISH primer, in the same color as the
finishing product. Dilute RIALTO FINISH to 25-30% with water and
apply either by brush, roller or spray. Average covering capacity
on fine plaster: 1 dl/m². After the application of RIALTO
FINISH, allow at least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate using a stainless steel trowel, and a
plastic trowel to finish off, RIALTO CARSO, a protective and decorative
plain-color coating with fine rustic granulated effect, based
on selected inert minerals (silica, marble and quartz), a thermoplastic
copolymer binder and UV ray-resistant pigments. Surface adherence
not lower than 10 kgf/cm². Water vapor permeability not lower
than 38 g/m² - 24 hours (ASTM E96 Regulations, µ=500,
Sd=0.6 m).
Average covering capacity: 2 kg/m² for type "1"
and 3.3 kg/m² for type "2".
Price for material and application, excluding any scaffolds, €
…….. per m² |
