Preparation
Completely remove any old paint or plastic material. Apply by
brush or low pressure spray (0.5 bar) to fully saturate the surface
a coat of RIALTO DURASIL, a water-repellent anti-saline efflorescence
single-can water-based hardening product. Average covering capacity:
0.3 l/m². After at least 48 hours, apply a coat of RIALTO
DOMOSIL primer, in the same color as the finishing product. Dilute
RIALTO DOMOSIL to 30% with water and apply by brush, roller or
spray. Average covering capacity on fine plaster: 1 l/10 m².
After the application of RIALTO DOMOSIL, allow at least 6 hours
before applying the finishing product.
Finishing
On a dry substrate, apply one single coat of RIALTO ROLLER SILOSSANICO,
a mat protective and decorative coating with a relief orange-peel
effect, based on siloxane resins, selected inert minerals with
different granulometry (granite, mica, silica), alcalis-, acid-
and UV ray-resistant pigments, using a medium-nap roller. Surface
adherence not less than 10 kgf/cm². Water vapor permeability:
250 g/m² - 24 hours (ASTM E96 Regulations), µ=143,
Sd=0.086 m.
Average covering capacity on fine plaster: 800 g/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
