Preparation
Completely remove any old paint or plastic material. Apply by
brush or low pressure spray (0.5 bar) to fully saturate the surface
a coat of RIALTO DURASIL, a water-repellent anti-saline efflorescence
single-can water-based hardening product. Average covering capacity:
0.3 l/m². After at least 48 hours, apply a coat of RIALTO
DOMOSIL primer, in the same color as the finishing product. Dilute
RIALTO DOMOSIL to 30% with water and apply by brush, roller or
spray. Average covering capacity on fine plaster: 1 l/10 m².
After the application of RIALTO DOMOSIL, allow at least 6 hours
before applying the finishing product.
Finishing
Apply one single coat of RIALTO DURALBO SILOSSANICO, a plaster
coating with weather-resistant embodied shade, mainly composed
of a modified siloxane resin and selected marble and silica grit,
using a stainless steel spatula. Surface adherence: > 6 kgf/cm².
Water vapor permeability: 180 g/m² - 24 hours (ASTM E96 Regulations),
µ=100, Sd=0.12 m.
Average covering capacity: 1.7 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
