Preparation
Completely remove any old paint or plastic material. Apply by
brush or low pressure spray (0.5 bar) to fully saturate the surface
a coat of RIALTO DURASIL, a water-repellent anti-saline efflorescence
single-can water-based hardening product. Average covering capacity:
0.3 l/m². After at least 48 hours, apply a coat of RIALTO
DOMOSIL primer, in the same color as the finishing product. Dilute
RIALTO DOMOSIL to 30% with water and apply by brush, roller or
spray. Average covering capacity on fine plaster: 1 l / 10 m².
After the application of RIALTO DOMOSIL, allow at least 6 hours
before applying the finishing product.
Finishing
On a dry substrate, using a stainless steel trowel, apply one
coat of RIALTO CARSO SILOSSANICO, a protective and decorative
plain-color coating with fine rustic granulated effect, based
on inert minerals (silica, marble and quartz) and mainly composed
of a modified siloxane resin and UV ray-resistant pigments, and
FINISH off using a plastic trowel. Surface adherence not less
than 10 kgf/cm². Water vapor permeability: >220 g/m²
- 24 hours (ASTM E96 Regulations, µ=80, Sd=0.1 m).
Average covering capacity: 2 kg/m² for type "1"
and 3.3 kg/m² for type "2".
Price for material and application, excluding any scaffolds, €
…….. per m² |
