Preparation
Remove all moulds and lichens using the sanitizing product RIALTO
SX5911, diluted with water (1 liter of RIALTO SX5911 and 10 liters
of water). Remove loose material and grease stains; remove dust
and dampen evenly with water before applying RIALTO HYDROLIME
RA.
Finishing
Apply using a stainless steel trowel, and a wet sponge trowel
to finish off, the breathable leveling plaster prepared with 1
part of water and two/three parts of RIALTO HYDROLIME RA, based
on natural hydraulic lime and impurity-free selected carbonate
sand in the correct granulometric proportion (0-1.2 mm), free
from cement and synthetic additives, excellent mineral surface
adherence.
Average covering capacity: 1.9 kg/m² per mm of thickness.
Price for material and application, excluding any scaffolds, €
…….. per m² |
