Preparation
Remove all moulds and lichens using the sanitizing product RIALTO
SX5911, diluted with water (1 liter of RIALTO SX5911 and 10 liters
of water). Apply one coat of RIALTO STABILIZER, an insulating
hardening primer based on acrylic and petrol resins in aromatic
and aliphatic solvents, either using a brush or a roller. Average
covering capacity: 1.7 dl/m². Allow at least 24 hours before
applying the finishing product.
Finishing
Apply two coats, using either a brush or roller and allowing at
least 12 hours between first coat and second coat (both diluted
to 15% with water if applied by roller or to 20% if applied by
brush), of RIALTO UNION MAT, an acrylic, washable, mat finishing
product based on inert minerals with high chemical strength such
as silica and silicates. It has a thermoplastic binder with excellent
surface adherence, and is water-repellent and breathable (water
vapor permeability: 200 g/m² - 24 hours, ASTM E96 Regulations).
Average covering capacity: 0.2 l/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
