Preparation
Remove all moulds and lichens using the sanitizing product RIALTO
SX5911, diluted with water (1 liter of RIALTO SX5911 and 10 liters
of water). On a perfectly leveled and smooth plaster, apply one
coat of RIALTO STABILIZER, an insulating adhesive primer based
on resins in solvents and selected pigments. Average covering
capacity: 100 ml/m². Allow at least 24 hours before applying
the finishing product.
Finishing
Apply using either a roller, spray or brush the single-can enamel
paint RIALTO GLAZER, based on water, acrylic resins and UV ray-resistant
pigments. It is a non-yellowing and non-blocking enamel-paint,
resistant to abrasion and corrosive action of atmospheric agents,
water vapor permeable and non-flammable.
Average covering capacity: 1 l / 8-10 m² if applied by brush
or roller, 1 l / 7-8 m² if applied by spray.
Price for material and application, excluding any scaffolds, €
…….. per m² |
