Preparation
Remove all moulds and lichens using the sanitizing product RIALTO
SX5911, diluted with water (1 liter of RIALTO SX5911 and 10 liters
of water). Apply one coat of RIALTO STABILIZER, an insulating
hardening primer based on acrylic and petrol resins in aromatic
and aliphatic solvents, either using a brush or a roller. Average
covering capacity: 1.7 dl/m². Allow at least 24 hours before
applying the finishing product.
Finishing
Apply two coats, using a brush or a roller of RIALTO ZIP, a protective
water-repellent breathable (water vapor permeability: 35 g/m²
- 24 hours, ASTM E96 Regulations) coating with weather-resistant
shade, based on highly resistant inert minerals, such as mica,
silica and quartz and a highly substrate-adherent thermoplastic
binder. Allow at least 12 hours between first coat (diluted to
not more than 10% with water) and second coat (undiluted).
Average covering capacity: 0.25 l/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
