Preparation
Remove all moulds and lichens using the sanitizing product RIALTO
SX5911, diluted with water (1 liter of RIALTO SX5911 and 10 liters
of water). Apply one coat of RIALTO STABILIZER, an insulating
hardening primer based on acrylic and petrol resins in aromatic
and aliphatic solvents, either using a brush or a roller. Average
covering capacity: 1.7 dl/m². Allow at least 24 hours before
applying the finishing product.
Finishing
Apply two coats, using a brush or a roller and allowing at least
8-10 hours between first and second coat, of RIALTO FINISH, a
protective coating with smooth mat suede-like decorative effect
and based on selected inert minerals (mica and quartz), a thermoplastic
terpolymer binder, a fungicide-bactericide agent, and UV ray-resistant
pigments. Surface adherence not lower than 8 kgf/cm² and
water-repellent with water vapor permeability equal to 30 g/m²
- 24 hours (ASTM E96 Regulations, µ=2860, Sd=0.71 m).
Average covering capacity on fine plaster: 290 ml/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
