Preparation
Remove all moulds and lichens using the sanitizing product RIALTO
SX 5911, diluted with water (1 l of RIALTO SX 5911 and 10 l of
water). Apply one coat of RIALTO FINISH primer, in the same color
as the finish. Dilute RIALTO FINISH to 25-30% with water and apply
using either a brush, roller or spray. Average covering capacity:
150 g/m².
Finishing
After 24 hours apply two coats of RIALTO MARINA, based on a binding
acrylic resin, fine grain marble and silica chippings; adhesion
> 10 kgf/cm²; permeability by water vapour 80 g/m²
in 24 hours (ASTM-E96). Application by stainless steel trowel
and finishing by plastic or humid sponge trowel.
Average covering capacity RIALTO MARINA: 1.3 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
