Preparation
Remove all moulds and lichens using the sanitizing product RIALTO
SX 5911, diluted with water (1 l of RIALTO SX 5911 and 10 l of
water). Apply one coat of RIALTO FINISH primer, in the same color
as the finish. Dilute RIALTO FINISH to 25-30% with water and apply
using either a brush, roller or spray. Average covering capacity:
150 g/m². After the application of RIALTO FINISH, allow at
least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate using a stainless steel trowel, and a
plastic trowel to finish off, RIALTO ERALIT, a protective and
decorative plain-color coating with fine rustic granulated effect,
based on selected inert minerals (silica, marble and quartz),
a thermoplastic copolymer binder and UV ray-resistant pigments.
Surface adherence not lower than 7 kgf/cm². Water vapor permeability
not lower than 24 g/m² - 24 hours (ASTM E96 Regulations,
µ=830, Sd=1 m).
Average covering capacity: 1,5 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
