Preparation
Remove moulds and lichens using the sanitizing product RIALTO
SX5911, diluted with water (1 liter of RIALTO SX5911 and 10 liters
of water). Apply one coat of RIALTO DOMOSIL primer in the same
color as the finishing product. Dilute RIALTO DOMOSIL to 30% with
water and apply either using a brush or a roller or a spray gun.
Average covering capacity: 1 l/10 m².
Finishing
After 24 hours apply two coats of RIALTO MARINA SILOSSANICO, based
on a binding copolymer siloxane resin, fine grain marble and silica
chippings; adhesion > 10 kgf/cm²; permeability by water
vapour 180 g/m² in 24 hours (ASTM-E96). Application by stainless
steel trowel and finishing by plastic or humid sponge trowel.
Average covering capacity RIALTO MARINA SILOSSANICO: 1.3 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
