Preparation
Remove moulds and lichens using the sanitizing product RIALTO
SX5911, diluted with water (1 liter of RIALTO SX5911 and 10 liters
of water). Apply one coat of RIALTO DOMOSIL primer in the same
color as the finishing product. Dilute RIALTO DOMOSIL to 30% with
water and apply either using a brush or a roller or a spray gun.
Average covering capacity: 1 l/10 m². After the application
of RIALTO DOMOSIL, allow at least 6 hours before applying the
finishing product.
Finishing
On a dry substrate, apply one single coat of RIALTO ROLLER SILOSSANICO,
a mat protective and decorative coating with a relief orange-peel
effect, based on siloxane resins, selected inert minerals with
different granulometry (granite, mica, silica), alcalis-, acid-
and UV ray-resistant pigments, using a medium-nap roller. Surface
adherence not less than 10 kgf/cm². Water vapor permeability:
250 g/m² - 24 hours (ASTM E96 Regulations), µ=143,
Sd=0.086 m.
Average covering capacity on fine plaster: 800 g/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
