Preparation
Remove moulds and lichens using the sanitizing product RIALTO
SX5911, diluted with water (1 liter of RIALTO SX5911 and 10 liters
of water). Apply one coat of RIALTO DOMOSIL primer in the same
color as the finishing product. Dilute RIALTO DOMOSIL to 30% with
water and apply either using a brush or a roller or a spray gun.
Average covering capacity: 1 l/10 m². After the application
of RIALTO DOMOSIL, allow at least 6 hours before applying the
finishing product.
Finishing
On a dry plaster surface, apply one single coat of RIALTO ERALIT
SILOSSANICO, a siloxane coating with weather-resistant embodied
shade, based on oligomeric siloxane alkylates, selected inert
minerals, and a permanent-elasticity copolymer thermoplastic binder,
using a stainless steel spatula. Surface adherence: > 6 kgf/cm².
Water vapor permeability: 180 g/m² - 24 hours (ASTM E96 Regulations),
µ=100, Sd=0.12 m.
Average covering capacity: 1.5 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
