Preparation
Remove moulds and lichens using the sanitizing product RIALTO
SX5911, diluted with water (1 liter of RIALTO SX5911 and 10 liters
of water). Apply one coat of RIALTO DOMOSIL primer in the same
color as the finishing product. Dilute RIALTO DOMOSIL to 30% with
water and apply either using a brush or a roller or a spray gun.
Average covering capacity: 1 l/10m². After the application
of RIALTO DOMOSIL, allow at least 6 hours before applying the
finishing product.
Finishing
On a dry substrate, using a stainless steel trowel, apply one
coat of plain color RIALTO CARSO SILOSSANICO, a protective and
decorative coating with fine rustic granulated effect, based on
inert minerals (silica, marble and quartz) and mainly composed
of a modified siloxane resin and UV ray-resistant pigments, and
FINISH off using a plastic trowel. Surface adherence not less
than 10 kgf/cm². Water vapor permeability: >220 g/m²
- 24 hours (ASTM E96 regulations), µ=80, Sd=0.1 m.
Average covering capacity: 2 kg/m² for type "1"
and 3.3 kg/m² for type "2".
Price for material and application, excluding any scaffolds, €
…….. per m² |
