Preparation
Remove moulds and lichens using the sanitizing product RIALTO
SX5911, diluted with water (1 liter of RIALTO SX5911 and 10 liters
of water). Apply to fully saturate the surface a coat of RIALTO
DURASIL, a water-based single-can, anti-saline efflorescence water-repellent
and hardening product, either using a brush or a low pressure
spray gun (0.5 bar). Average covering capacity: 0,3 l/m².
After the application of RIALTO DURASIL, allow at least 48 hours
before applying the finishing product.
Finishing
Apply using a brush two coats of RIALTO DOMOSIL, a breathable
water-repellent and permanent fungicide and bactericide agent,
based on siloxane and UV ray-resistant pigments (DIN 53122, 230
g/m² - 24 hours, µ=410, Sd=0.09 m). The first coat
should be diluted to 35% with water and the second to 25%. Allow
at least 12 hours before applying the second coat.
Average covering capacity: 1 l/5 m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
