Preparation
Apply using either a brush or roller a coat of RIALTO STABILIZER,
a hardening and insulating product based on acrylic and petrol
resins in aromatic and aliphatic solvents. Average covering capacity:
1.7 dl/m². Allow 24 hours before applying the finishing product.
Finishing
Apply two coats, using a brush or a roller and allowing at least
8-10 hours between first and second coat, of RIALTO FINISH, a
protective coating with smooth mat suede-like decorative effect
and based on selected inert minerals (mica and quartz), a thermoplastic
terpolymer binder, a fungicide-bactericide agent, and UV ray-resistant
pigments. Surface adherence not lower than 8 kgf/cm² and
water-repellent with water vapor permeability equal to 30 g/m²
- 24 hours (ASTM E96 Regulations), µ=2860, Sd=0.71 m.
Average covering capacity on fine plaster: 290 ml/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
