Preparation
Apply an undercoat of RIALTO FINISH in the same color as the finish.
Dilute RIALTO FINISH to 25-30% with water and apply using either
a brush, roller or spray. Average covering capacity on fine plaster:
150 g/m². After the application of RIALTO FINISH, allow at
least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate using a medium-nap roller one coat of
RIALTO ROLLER, a protective and decorative mat coating with orange-peel
relief effect, based on a thermoplastic copolymer binder, selected
inert minerals (granite, mica and silica) with different granulometry,
and alcali-, acid- and UV ray-resistant pigments. Surface adherence
not lower than 10 kgf/cm². Water vapor permeability not lower
than 45 g/m² - 24 hours (ASTM E96 Regulations), µ=800,
Sd=0.48 m.
Average covering capacity on fine plaster: 800 g/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
