Preparation
Apply an undercoat of RIALTO FINISH in the same color as the finish.
Dilute RIALTO FINISH to 25-30% with water and apply using either
a brush, roller or spray. Average covering capacity on fine plaster:
150 g/m². After the application of RIALTO FINISH, allow at
least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate using a stainless steel trowel and a
plastic trowel one coat of RIALTO DURALBO, a protective coating
with fine scored decorative effect, based on selected inert minerals
(granite, silica and marble), a thermoplastic copolymer binder
and UV ray-resistant pigments. Surface adherence not lower than
6 kgf/cm². Water vapor permeability not lower than 23 g/m²
- 24 hours (ASTM E96 Regulations), µ=830, Sd=1.0 m.
Average covering capacity: 1.7 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
