Preparation
Apply one coat of RIALTO DOMOSIL primer, in the same color as
the finishing product. Dilute RIALTO DOMOSIL to 30% with water
and apply either using a brush or a roller or a spray gun. Average
covering capacity on fine plaster: 1 l/10m². After the application
of RIALTO DOMOSIL, allow at least 6 hours before applying the
finishing product.
Finishing
On a dry substrate, apply one single coat of RIALTO ROLLER SILOSSANICO,
a mat protective and decorative coating with a relief orange-peel
effect, based on siloxane resins, selected inert minerals with
different granulometry (granite, mica, silica), alcalis-, acid-
and UV ray-resistant pigments, using a medium-nap roller. Surface
adherence not less than 10 kgf/cm². Water vapor permeability:
250 g/m² - 24 hours (ASTM E96 Regulations), µ=143,
Sd=0.086 m.
Average covering capacity on fine plaster: 800 g/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
