Preparation
Remove any loose paint or plaster material. With a steel trowel,
level the surface (average thickness: 4 mm) using a mix composed
of: 2 parts of RIALTO MATONAL, 3 parts of Portland Cement, 3 parts
of sand and water as needed (parts in volume). Average covering
capacity for 4-mm thickness of RIALTO MATONAL: 1 l/m². Where
the surface is damaged, incorporate RIALTO FIBRATEX, an alcali-resistant
fiberglass (width: 25 cm).
Finishing
Apply using a stainless steel trowel, and a wet sponge trowel
to finish off, the breathable leveling plaster prepared with 1
part of water and two/three parts of RIALTO HYDROLIME RA, based
on natural hydraulic lime and impurity-free selected carbonate
sand in the correct granulometric proportion (0-1.2 mm), free
from cement and synthetic additives, excellent mineral surface
adherence.
Average covering capacity: 1.9 kg/m² per mm of thickness.
Price for material and application, excluding any scaffolds, €
…….. per m² |
