Preparation
Remove and restore any damaged section of the plaster surface.
Level off with RIALTO WALLCEM finishing and leveling plaster.
RIALTO WALLCEM average covering capacity: 2 kg/m². Apply
using a brush or roller a coat of RIALTO STABILIZER, a hardening
and insulating primer based on acrylic and petrol resins in aromatic
and aliphatic solvents. Average covering capacity: 1.7 dl/m².
Allow at least 24 hours before applying the finishing product.
Finishing
Apply two coats, using a brush or a roller and allowing at least
8-10 hours between first and second coat, of RIALTO FINISH, a
protective coating with smooth mat suede-like decorative effect
and based on selected inert minerals (mica and quartz), a thermoplastic
terpolymer binder, a fungicide-bactericide agent, and UV ray-resistant
pigments. Surface adherence not lower than 8 kgf/cm² and
water-repellent with water vapor permeability equal to 30 g/m²
- 24 hours (ASTM E96 Regulations, µ=2860, Sd=0.71 m).
Average covering capacity on fine plaster: 290 ml/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
