Preparation
Remove and restore any damaged section of the plaster surface.
Level off with RIALTO WALLCEM finishing and leveling plaster.
RIALTO WALLCEM average covering capacity: 2 kg/m². Apply
an undercoat of RIALTO FINISH, in the same color as the finishing
product. Dilute RIALTO FINISH to 25-30% with water and apply using
either a brush, roller or spray. Average covering capacity on
fine plaster: 150 g/m². After the application of RIALTO FINISH,
allow at least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate using a medium-nap roller one coat of
RIALTO ROLLER, a protective and decorative mat coating with orange-peel
relief effect, based on a thermoplastic copolymer binder, selected
inert minerals (granite, mica and silica) with different granulometry,
and alcali-, acid- and UV ray-resistant pigments. Surface adherence
not lower than 10 kgf/cm². Water vapor permeability not lower
than 45 g/m² - 24 hours (ASTM E96 Regulations, µ=800,
Sd=0.48 m).
Average covering capacity on fine plaster: 800 g/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
