Preparation
Remove and restore any damaged section of the plaster surface.
Level off with RIALTO WALLCEM finishing and leveling plaster.
RIALTO WALLCEM average covering capacity: 2 kg/m². Apply
an undercoat of RIALTO FINISH, in the same color as the finishing
product. Dilute RIALTO FINISH to 25-30% with water and apply using
either a brush, roller or spray. Average covering capacity on
fine plaster: 150 g/m². After the application of RIALTO FINISH,
allow at least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate using a stainless steel trowel, and a
plastic trowel to finish off, one coat of RIALTO ERALIT, a protective
and decorative coating with fine troweled plaster and antique-like
speckled effect, based on selected inert minerals (silica, marble
and quartz), a thermoplastic copolymer binder and UV ray-resistant
pigments. Surface adherence not lower than 7 kgf/cm². Water
vapor permeability not lower than 24 g/m² - 24 hours (ASTM
E96 Regulations, µ=830, Sd=1.0 m).
Average covering capacity on fine plaster: 1.5 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
