Preparation
Remove and restore any damaged section of the plaster surface.
Level off with RIALTO WALLCEM finishing and leveling plaster.
RIALTO WALLCEM average covering capacity: 2 kg/m². Apply
an undercoat of RIALTO FINISH, in the same color as the finishing
product. Dilute RIALTO FINISH to 25-30% with water and apply using
either a brush, roller or spray. Average covering capacity on
fine plaster: 150 g/m². After the application of RIALTO FINISH,
allow at least 6 hours before applying the finishing product.
Finishing
Apply on a dry substrate using a stainless steel trowel and a
plastic trowel one coat of RIALTO DURALBO, a protective coating
with fine scored decorative effect, based on selected inert minerals
(granite, silica and marble), a thermoplastic copolymer binder
and UV ray-resistant pigments. Surface adherence not lower than
6 kgf/cm². Water vapor permeability not lower than 23 g/m²
- 24 hours (ASTM E96 Regulations, µ=830, Sd=1.0 m).
Average covering capacity: 1.7 kg/m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
