Preparation
Remove and restore any damaged section of the plaster surface.
Level off with RIALTO WALLCEM finishing and leveling plaster.
RIALTO WALLCEM average covering capacity: 2 kg/m². Apply
using a brush or low-pressure spray (0.5 bar) to fully saturate
the surface a coat of RIALTO DURASIL, a water-based hardening
and water-repellent anti-saline efflorescence single-can primer.
Average covering capacity: 0.3 l/m².
Finishing
Apply using a brush two coats of RIALTO DOMOSIL, a breathable
water-repellent and permanent fungicide and bactericide agent,
based on siloxane and UV ray-resistant pigments (DIN 53122, 230
g/m² - 24 hours, µ=410, Sd=0.09 m). The first coat
should be diluted to 35% with water and the second to 25%. Allow
at least 12 hours before applying the second coat.
Average covering capacity: 1 l/5 m².
Price for material and application, excluding any scaffolds, €
…….. per m² |
